SETTING THE CARD STAND AND PATTERN
CARD
Hold the Card Stand
with
the transparent
flap facing you,
and open up the flap as shown.
Fit the two pegs of the Card Stand
into two
holes
behind
the Card Slit.
If
a Pattern Card is not used, close down the flap of the
Card Stand.
Insert the top
end
of
a
Pattern Card
into the
Card
Stand.
Insert the bottom
end
of the Pattern Card into
the
Card
Slit.
Using the Card Dial
insert the
Card
further into the Slit and
set it to the starting line.
Close down
the transparent
flap
of the Card Stand.
-
20
-