Site Requirements
When selecting the location for the printer, consider interface requirements, power require
ments, and environmental factors. Select a location with the proper power source available and
within the maximum cable length specifications to interface with the host computer. The
printer is designed to operate in a relatively dust free environment such as a computer room or
business office with an ambient temperature of 41_ to 104_ F (5_ to 40_ C) and a relative
humidity of 10% to 90%. The site selected for the printer must also allow air to circulate freely
all around the printer. A minimum of 3 feet clearance behind the printer should be provided to
allow air circulation and easy access to the paper stacking area. Figure 10-1 illustrates the site
requirements for floor cabinet model printers. Figure 10-2 illustrates the site requirements
for pedestal model printers.
The warranty may be voided if adequate ventilation is not provided. Overheating
and serious damage to the printer components can occur if the air vents at the sides
and bottom of the printer are blocked.
10-2
CAUTION
-
Figure 10-1. Site Requirements - Floor Cabinet Model
-
Installation