Bit Image Mode, Double Density
ASCII Code:
Hex Code:
Purpose:
Expression:
where:
NOTE: The DATA can be expressed in a CHR$(DATA) format with the appropriate
decimal values of the ASCII characters supplied especially in cases where the dot pat
terns of nonprintable characters are required.
Comment:
Example:
NOTE: Depending on the host computer system, it may be necessary to include a width
statement within the BASIC program.
6-8
P-SERIES
N/A
N/A
Selects Double Density Bit Image graphics.
CHR$(27);"L";CHR$(n1);CHR$(n2);"DATA"
n1 + 256 n2 define the number of data bytes to follow.
DATA = ASCII characters for the dot pattern bytes.
For detailed information, refer to the Bit Image section in the Graphics chap
ter.
The following example produces Double Density Bit Image graphics of the
pattern used in the Single Density Bit Image Mode example. Note that the
amount of data must be doubled for double density (the data is used 80 times
rather than 40).
SERIAL MATRIX
ESC L
1B 4C
Programming