Load Values - Printronix P6000L User's Reference Manual

4. Press RUN/STOP TEST. All currently selected values are saved as the power-up default
value set.
5. Press CLEAR FAULT once to return to OFFLINE READY.
6. Lock the printer configuration by simultaneously pressing the RUN/STOP TEST and
CONFIG MENU switches, and place the printer online.
The saved values remain effective until specifically changed by storing or saving other values. It
is important to remember that all currently selected values are saved, not just the specific value
most recently changed. Note also that values changed by control code sequences will also be
saved. For example, if the print mode is changed by control code and the configuration values
are subsequently saved, the print mode change is also saved. However, horizontal tab posi
tions, margin settings, and character attributes such as bold, double high, etc. that can be
changed by control code but are not reflected on the display are not saved with the configura
tion value set.

Load Values

The current power-up default configuration value set can be loaded (restored) as needed. If,
for example, a number of configuration values were changed and stored for temporary use, the
complete power-up default set can be restored. This provides a convenient method of reset
ting the printer's configuration to known values. The following general procedure can be used
to load (restore) the power-up default values.
1. Unlock the printer configuration by simultaneously pressing the RUN/STOP TEST and
CONFIG MENU switches.
2. Select and display LOAD PARAMETERS.
3. Repeatedly press CONFIG VALUE until the LOAD DEFAULT PARAMETERS mes
sage is displayed.
4. Press RUN/STOP TEST. The current power-up default values are restored and in effect.
5. Press CLEAR FAULT once to return to OFFLINE READY.
6. Lock the printer configuration and place the printer online.
3-4 Configuration