Forms Length Set (Lines)
ASCII Code:
Hex Code:
Purpose:
Expression:
where:
Comment:
Programming
P-SERIES
N/A
N/A
Sets the length of a form (paper) in lines.
N/A
n = 1 to 127 (all others are ignored) to specify the number of lines
per page at the current line spacing.
The quotient of forms length in lines and lines per inch cannot exceed 226
inches, or incorrect forms length will result.
The forms length may also be set by the F/L switch on the control panel. The
control code forms length setting from the host computer will override the
control panel setting and be reflected on the display when F/L is pressed.
When this code is received, the current line becomes the first line of the form.
Skip-over perforation is set to the default value.
Forms length is stored in inches; therefore, subsequent line spacing changes
do not affect the result of this command.
SERIAL MATRIX
ESC C n
1B 43 n
CHR$(27);"C";CHR$(n);
6-29