Line Spacing 8 Lpi (One Line Only) - Printronix P6000L User's Reference Manual

Line Spacing 8 lpi (One Line Only)

ASCII Code:
Hex Code:
Purpose:
Expression:
Comment:
Example:
Programming
P-SERIES
ACK
06
Selects line spacing of 1/8 inch for one line only.
CHR$(6);
The default line spacing is reselected automatically after one line. Line spac
ing may be selected either by the control panel 6/8 LPI switch or by line spac
ing control codes. The control code setting will override the setting on the
display.
8 lpi spacing for one line applies only to P-Series programming compatibil
ity.
In Serial Matrix mode, 8 lpi line spacing for a single line can be accomplished
by using ESC J (Line Spacing n/216-Inch), where n=27 (27/216) and Line
Feed = new line.
Serial Matrix compatible control code ESC 0 and P-Series SOH 0 can be
used for continuous 1/8-inch line spacing.
The following example illustrates 1/8 inch line spacing set for one line only.
SERIAL MATRIX
N/A
N/A
N/A
6-37