Selecting Print Mode - Printronix P6000L User's Reference Manual

Line printers
Table of Contents

Advertisement

7.
Verify the following and make any necessary adjustments.
a. The paper stack is centered on the tent.
b. The paper perforation folds are folding in their natural prefolded direction.
c. The paper is following a straight path down to the tent in alignment with the outer
edges.
d. The paper is against the front paper fence as it rests centered on the tent.
8.
Run the printer and let approximately 15 to 20 sheets of paper stack.
9.
Again verify the items listed in step 7. Any adjustments to the paper stack can be made
while the printer is running. If an adjustment is made, again check the stack after approxi
mately 15 to 20 sheets have been processed.
NOTE: If the paper is not stacking properly, check the following items in addition to
those listed in step 7.
1.
If printing occurs across the paper perforations, the paper will not stack cor
rectly. Adjust the Skip Over Perforation configuration parameter to eliminate
printing across the paper perforations.
2.
If the paper path is too close to either side panel, paper stacking can be dis
rupted. Adjust the paper path toward the center of the printer, away from the
side panels.
3.
The front paper fence may be incorrectly positioned. Reposition the front pa
per fence into one of the other bracket locations.

Selecting Print Mode

Characters and symbols are printed based on the print mode selected. During normal opera
tion, the message display indicates the printer is online and the print mode currently selected.
For example,
ON LINE
DP AT 10 CPI
indicates the Data Processing print mode at 10 characters per inch is selected. To select a print
mode, perform the following instructions.
1.
Place the printer offline.
2.
Simultaneously press RUN/STOP TEST and CONFIG MENU to unlock the printer con
figuration.
3.
Press PRINT MODE; the display will show the current print mode.
4.
Repeatedly press PRINT MODE until the required print mode is displayed.
5.
Press RUN/STOP TEST to select the displayed print mode.
6.
Press CLEAR FAULT to return to OFFLINE READY.
Operation
*
2-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

P6200l

Table of Contents