Form Feed - Printronix P6000L User's Reference Manual

Form Feed

ASCII Code:
Hex Code:
Purpose:
Expression:
Comment:
Programming
P-SERIES
FF
0C
Prints the data in the buffer and advances the paper to the next top-of-form
and the printhead moves to the first character column. (See the comment.)
CHR$(12);
The default forms length is determined by the value in non-volatile memory.
Forms length is set by using the control panel F/L switch or forms length con
trol codes. Code FF cancels all single-line only print attributes.
In the P-Series mode with the EVFU loaded, the FF code will advance the
paper to EVFU channel 1 (if defined) if the PI line is disabled, or to channel
13 (if defined) if the PI line is true and enabled. If undefined, a line feed will
occur. If the DAVFU is selected and defined, the FF code will advance the
paper to channel 1. In the Serial Matrix VFU mode, the FF code will advance
the paper to top-of-form.
SERIAL MATRIX
FF
0C
CHR$(12);
6-27