Nortel M7410 Installation And Maintenance Manual page 50

Your installer programs both the Call Park prefix and the delay before parked calls
are returned to the originating telephone. External calls parked for longer than the
programmed delay are returned to your telephone.
Call Park can be disabled by your installer.
Displays
Already parked
No call to park
Invalid number
No call on: 101
Park denied
Parked on: 402
PAGE
Parking full
For other displays, see
P0908510 Issue 02
Tip
Answered Hunt Group calls are parked in the same manner as other calls. For
more information on Hunt Groups see
The person you were talking to has already parked your
call. You cannot park the same call.
You have attempted to use Call Park with no active call on
your telephone. If the call you want to park is on hold,
reconnect to it before you park it.
You have entered an invalid retrieval code.
There was no call on the retrieval code you entered.
You have tried to park a conference call. Split the
conference and park the calls separately. The person who
retrieves the calls can reconnect the conference.
Record the code shown. Use Page (
press PAGE to announce the call and its retrieval code.
EXIT
All available retrieval codes are in use. Transfer the call or
take a message instead.
Common feature displays
Enterprise Edge Feature Programming Telephone Guide
Hunt Groups on page 83.
ƒfl‚
on page 125.
Transferring calls 49
) or