Configuring Igmp Snooping - Nortel BayStack 450 Using Manual

Configuring IGMP Snooping

To create or modify IGMP Snooping ports, follow the flowcharts in
Figures
Choose IGMP Configuration (or press g) from the Switch Configuration Menu
screen to open the IGMP Configuration screen.
IGMP Configuration screen
created/port members
Figure D-6.
302401-D Rev 00
D-6 to D-8.
Are VLANs
No
configured?
Yes
Is the
No
Snooping field set
correctly?
Yes
Is
No
Snooping field
set?
Yes
Is
No
the Proxy field set
correctly?
Yes
2
Configuring IGMP Snooping (1 of 3)
Go to VLAN flowchart. Create VLANs/
configure port members, as required.
Set the correct value
for the Snooping field.
2
Set the correct value
for the Proxy field.
Key
Quick Steps to Features
Off-page reference
On-page reference
BS45053A
D-7