Table of Contents
Advertisement
Using the BayStack 450 10/100/1000 Series Switch
Switch Configuration
The Switch Configuration Menu screen
your switch configuration.
Note: The High Speed Flow Control Configuration option only appears when
an optional gigabit MDA is installed.
Choose Switch Configuration (or press w) from the main menu to open the Switch
Configuration Menu screen.
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu.
Figure 3-6.
Switch Configuration Menu Screen
Table 3-5
3-18
Switch Configuration Menu
MAC Address Table
VLAN Configuration...
Port Configuration...
High Speed Flow Control Configuration...
MultiLink Trunk Configuration...
Port Mirroring Configuration...
Rate Limiting Configuration...
IGMP Configuration...
Display Port Statistics
Clear All Port Statistics
Return to Main Menu
describes the Switch Configuration Menu screen options.
(Figure
3-6) allows you to set or modify
Press Ctrl-C to return to Main Menu.
302401-D Rev 00
Advertisement
Chapters
Table of Contents
