Ac Power Receptacle - Nortel BayStack 450 Using Manual

1

= AC power receptacle

2 = RPSU connector
3 = Cascade Module Slot
Figure 1-5. BayStack 450 Switch Back Panel
AC Power Receptacle
The AC power receptacle accepts the AC power cord (supplied). For installation
outside of North America, make sure that you have the proper power cord for your
region. Any cord used must have a CEE-22 standard V female connector on one
end and must meet the IEC 320-030 specifications.
for international power cords:
Table 1-2.
Country/Plug description
Continental Europe:
• CEE7 standard VII male plug
• Harmonized cord (HAR marking
on the outside of the cord jacket
to comply with the CENELEC
Harmonized Document HD-21)
302401-D Rev 00
International Power Cord Specifications
BayStack 450 10/100/1000 Series Switches
1
100-240V
47-63Hz~
Redundant Power
2
Table 1-2
Specifications
220 or 230 VAC
50 Hz
Single phase
3
Cascade Module
BS45004A
lists specifications
Typical plug
228FA
(continued)
1-9