Nortel BayStack 450 Using Manual page 68

Using the BayStack 450 10/100/1000 Series Switch
To configure the VLAN port membership for VLAN 1:
Select Switch Configuration from the BayStack 450-12T Main Menu (or
1.
press w).
From the Switch Configuration Menu, select VLAN Configuration (or
2.
press v).
From the VLAN Configuration Menu select VLAN Configuration (or
3.
press v).
The default VLAN Configuration screen opens
1-6
------
Unit #1 UUUUUU
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-26. Default VLAN Configuration Screen Example
The VLAN Configuration screen settings shown in
settings with all switch ports classified as untagged members of VLAN 1.
Figure 1-27
support the VLAN 3 broadcast domain shown in
optional).
1-42
VLAN Configuration
Create VLAN:
Delete VLAN:
VLAN Name:
Port Membership
7-12
------
UUUUUU
shows the VLAN Configuration screen after it is configured to
[ 1 ]
[ ]
[ VLAN #1 ]
Press Ctrl-C to return to Main Menu.
Figure 1-25
(Figure 1-26):
Figure 1-26 are default
(VLAN Name is
302401-D Rev 00