Using the BayStack 450 10/100/1000 Series Switch
Trunk Configuration Screen Examples
This section shows examples of the MultiLink Trunk configuration screens for the
client/server configuration example shown in
screens show how you could set up the trunk configuration screens for switches
S1 to S4. See
page
information.
Trunk Configuration Screen for Switch S1
Switch S1 is set up with five trunk configurations: T1, T2, T3, T4, and T5.
Setting up the Trunk Configuration For S1:
To set up the trunk configuration, choose MultiLink Trunk Configuration
(or press t) from the MultiLink Trunk Configuration Menu screen
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu.
Figure 1-41.
Choosing the MultiLink Trunk Configuration Screen
1-60
"Spanning Tree Considerations for MultiLink
1-72, and "MultiLink Trunk Configuration" on page 3-37 for more
MultiLink Trunk Configuration Menu
MultiLink Trunk Configuration...
MultiLink Trunk Utilization...
Return to Switch Configuration Menu
Figure 1-40
Press Ctrl-C to return to Main Menu.
on
page
1-59. The
Trunks" on
(Figure
1-41).
302401-D Rev 00