Nortel BayStack 450 Using Manual page 127

In-Band Stack IP Address:
In-Band Switch IP Address: [ 0.0.0.0 ]
In-Band Subnet Mask:
Default Gateway:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 2-14. IP Configuration/Setup Screen (Standalone Switch)
4.
5.
See Chapter 3, "Using the Console Interface," for detailed descriptions of the
menus and screens you can use to customize your configuration.
302401-D Rev 00
IP Configuration/Setup
BootP Request Mode:
Configurable
-------------------
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ 0.0.0.0 ]
Enter the IP address of the switch in the In-Band IP Address field, then
press [Return].
Note: When you enter the IP address in the In-Band IP Address field, and
the In-Band Subnet Mask field is not present, the software provides an
in-use default value for the In-Band Subnet Mask field, based on the class
of the entered IP address.
Enter the IP subnet mask address in the In-Band Subnet Mask field, then
press [Return].
Enter the default gateway address in the Default Gateway field, then
press [Return].
Installing the BayStack 450 Switch
[ BootP Disabled
In Use
---------------
0.0.0.0
0.0.0.0
Press Ctrl-C to return to Main Menu.
]
Last BootP
---------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
2-19