Rpsu Connector - Nortel BayStack 450 Using Manual

Using the BayStack 450 10/100/1000 Series Switch
Table 1-2.
Country/Plug description
U.S./Canada/Japan:
• NEMA5-15P male plug
• UL recognized (UL stamped
on cord jacket)
• CSA certified (CSA label
secured to the cord)
United Kingdom:
• BS1363 male plug with fuse
• Harmonized cord
Australia:
• AS3112-1981 Male plug

RPSU Connector

The RPSU connector allows you to connect a backup power supply unit to the
switch. Nortel Networks provides an (optional) high-power redundant power
supply unit (HRPSU) for this purpose. The HRPSU is a hot-swappable power
supply unit that provides uninterrupted operation to up to four BayStack 450
switches in the event that any of the switch power supplies fail.
Nortel Networks provides the HRPSU power rack (Order No. AA0002001) with
four slots for power supply modules (Order No. AA0005003). Each HRPSU can
support up to four BayStack 450 switches. Installation instructions are provided
with the HRPSU.
Contact your Nortel Networks sales representative for more information about the
HRPSU.
1-10
International Power Cord Specifications
Specifications Typical plug
100 or 120 VAC
50–60 Hz
Single phase
240 VAC
50 Hz
Single phase
240 VAC
50 Hz
Single phase
227FA
229FA
230FA
302401-D Rev 00