Nortel BayStack 450 Using Manual page 126

Using the BayStack 450 10/100/1000 Series Switch
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Figure 2-13. Main Menu
Select IP Configuration/Setup (or press i) from the Main Menu.
3.
This selection displays the IP Configuration/Setup screen
Note: The IP interface of the BayStack 450 switch is only on VLAN 1.
You can manage the switch only from VLAN 1 (or via routers that connect
VLAN 1 to the network management station).
Note: IP addresses are written as four decimal numbers (for example,
123.123.123.123). Each decimal number represents an 8-bit octet. When
strung together, the four octets form the 32-bit Internet address. This is called
dotted-decimal notation. The largest possible value of a field in a
dotted-decimal number is 255, which represents an octet of all ones.
2-18
BayStack 450-24T Main Menu
IP Configuration/Setup...
SNMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Display Hardware Units...
Spanning Tree Configuration...
TELNET Configuration...
Software Download...
Configuration File...
Display Event Log
Reset
Reset to Default Settings
Logout
(Figure 2-14).
302401-D Rev 00