Desktop Switch Application - Nortel BayStack 450 Using Manual

Note: All models of the BayStack 450 switch can be used interchangeably in
the following network configuration examples.

Desktop Switch Application

Figure 1-6
desktop workstations are connected directly to switch ports.
This configuration provides dedicated 100 Mb/s connections to the network
center, to the server, and up to 26 users. This configuration uses the optional
400-4TX MDA (10BASE-T/100BASE-TX MDA).
Before
10BASE-T hub
Server Up to 22 users
To
Network
Center
Key
10 Mb/s
100 Mb/s
200 Mb/s
- 22 users share 10 Mb/s (10/22 Mb/s per user)
- Server bottleneck (10 Mb/s bandwidth)
- Network center bottleneck (10 Mb/s bandwidth)
Figure 1-6. BayStack 450 Switch Used as a Desktop Switch
302401-D Rev 00
shows a BayStack 450-24T switch used as a desktop switch, where
Network
- 26 users; each with dedicated 100 Mb/s bandwidth
- Server with dedicated 100 Mb/s bandwidth
- Network center with dedicated 100 Mb/s full-duplex
bandwith (200 mb/s bidirectional)
BayStack 450 10/100/1000 Series Switches
After
BayStack 450-24T switch
Server Up to 26 users
To
Center
BS45005A
1-19