Nortel BayStack 450 Using Manual page 211

You can monitor the software download process by observing the BayStack 450
switch LEDs (see
page
Image Filename:
TFTP Server IP Address:
Start TFTP Load of New Image:
The Software Download process has started.
switch before the process has completed (approximately 10 minutes).
Enter text, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-33. Software Download Screen
Table 3-28
Table 3-28. Software Download Screen Fields
Field Description
Image Filename The software image load file name.
Note:
code image and the agent image . For proper operation of the switch, the new boot code
image must be downloaded before the agent image is downloaded.
Default Value
Range
302401-D Rev 00
"LED Indications During the Download
3-80).
Software Download
describes the Software Download screen fields.
Certain software releases may require you to download two images: the boot
Zero-length string
An ASCII string of up to 30 printable characters
[ b4501102.img ]
[ 192.0.1.12 ]
[ Yes ]
Do NOT power down the
Press Ctrl-C to return to Main Menu.
Using the Console Interface
Process" on
(continued)
3-79