Electrical equipment
Air bag
Bravo-Brava
w ^ .
REFITTING CLOCK SPRING
1. If the clock spring does not require re
placement, remove the adhesive tape or
clip fitted previously without turning the
upper ring.
2. The upper clock spring case is identified
by one of two different colours:
-Green for vehicles with power steering.
-Red for vehicle without power steering.
3. Position the clock spring on the stalk unit,
then fasten by tightening the three cross-
headed screws.
4. If a new clock spring is fitted, turn the
safety key until it comes completely away
after fastening the spring to the stalk unit.
110/2
Publication no.
506.670/07