NETGEAR WAC720 Reference Manual page 65

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
To view the attached wireless stations, and to view details for a wireless station:

1. Select Monitoring > Wireless Stations.
The Available Wireless Stations table shows the MAC address, BSSID, SSID, channel,
rate, state, type, AID, mode, and status for each device. For information about these and
more fields, see the following table.
2. To update the list, click the Refresh button.
If the wireless access point is rebooted, the wireless station data is lost until the wireless
access point rediscovers the devices. To force the wireless access point to look for
associated devices, click the Refresh button.
3. To view details of a wireless station, select the corresponding radio button, and then click
the Details button.
The Wireless Stations Details page displays.
The following table explains the fields of the Wireless Stations Details page:
Setting
MAC Address
BSSID
SSID
Channel
Rate
State
Type
AID
Mode
Status
RSSI
Idle Time
Description
The MAC address of the wireless station.
The BSSID that the wireless station is using.
The SSID that the wireless station is using.
The channel that the wireless station is using.
The transmit data rate in Mbps of the wireless station.
The features that are enabled on the wireless station.
The authentication and encryption type that the wireless station is using.
The associated identifier (AID) of the wireless station.
The wireless mode in which the wireless station is operating.
The wireless status of the wireless station (Associated).
The received signal strength indicator (RSSI) of the wireless station.
The time since the last frame was received from the wireless station.
Management and Monitoring
65