Configure Ensemble Mode; Manage An Ensemble - NETGEAR WAC720 Reference Manual

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730

Configure Ensemble Mode

To configure Ensemble mode on the access point:

1. Select Configuration > Ensemble General.
2. To enable Ensemble mode, select the Start radio button.
3. In the Ensemble Name field, enter the ensemble name.
4. Set the access point's priority in the ensemble.
The lowest-numbered AP becomes the dominant AP.
5. Click the Apply button.
Your settings are saved.

Manage an Ensemble

An ensemble can be managed through the dominant access point's web management
interface, or through a configured IP address of the ensemble. You can manage an
ensemble's channel assignment settings, upgrade settings, and security settings.
Manage an Ensemble's Channel Assignment Settings
To manage an ensemble's channel assignment settings:

1. Select Configuration > Ensemble > Advanced > Channel Assignment Settings.
2. From the Channel Interference Limit menu, select an interference limit percentage.
3. Select a channel selection interval from the Channel Selection Interval menu.
4. Click the Apply button.
Management and Monitoring
69