NETGEAR WAC720 Reference Manual page 30

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Note: Although the product package includes four wall anchors and screws,
two screws are sufficient to attach the wall mounting bracket as shown
in the previous figure. However, if you prefer, you can use four screws
and insert them through the mounting holes in the corners of the wall
mounting bracket.
6. Align the three holes on the access point bracket with the three hooks on the wall mounting
bracket and slide the access point down until it click-attaches to the wall mounting bracket
and is secured. The following figures show a side view of the wall.
Before click-
attachment
Initial Setup
30
After click-
attachment