NETGEAR WAC720 Reference Manual page 38

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Setting
Network Authentication
and Data Encryption
(continued)
Wireless Client Security
Separation
VLAN ID
6. (Optional) In the QoS Policies section, select a QoS policy from the Incoming menu,
Outgoing menu, or both. Depending on your selection, the policy is applied to incoming
packets, outgoing packets, or both incoming and outgoing packets, and is displayed in the
Policy Details fields.
Note: To be able to select a QoS policy, you must first configure one or more
policies (see
7. Click the Apply button.
Your settings are saved.
Description
WPA2 with Configure the RADIUS server settings and select AES or
RADIUS TKIP + AES encryption.
See
RADIUS
Note:
WPA & WPA2 with Configure the RADIUS server setting. TKIP + AES
RADIUS encryption is the default encryption.
See
RADIUS
Note:
WPA with TKIP or WPA2 with AES.
WPA-PSK Enter a WPA passphrase and select TKIP or TKIP + AES
encryption.
See
WPA2-PSK
WPA2-PSK Enter a WPA passphrase and select AES or TKIP + AES
encryption.
See
WPA2-PSK
Note:
WPA-PSK & Enter a WPA passphrase. TKIP + AES encryption is the
WPA2-PSK default encryption.
See
WPA2-PSK
Note:
WPA with TKIP or WPA2 with AES.
If you enable wireless client security separation by selecting Enable from the
menu, the associated wireless clients cannot communicate with each other. By
default, Disable is selected from the menu. This feature is intended for hotspots
and other public access situations.
Enter the VLAN ID to be associated with this wireless security profile. The
default VLAN ID is 1. The VLAN ID must match the VLAN ID that is used by the
other devices in your network.
Configure and Manage Quality of Service Policies
Wireless Configuration and Security
38
Configure WPA With RADIUS and WPA & WPA2 With
on page 39.
Select this setting only if all clients support WPA2.
Configure WPA With RADIUS and WPA & WPA2 With
on page 39.
This setting allows clients to connect through either
Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
on page 40.
Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
on page 40.
Select this setting only if all clients support WPA2.
Configure WPA-PSK, WPA2-PSK, and WPA-PSK &
on page 40.
This setting allows clients to connect through either
on page 83).