NETGEAR WAC720 Reference Manual page 20

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
802.11bg/ng/bgn
Configure
To configure the 802.11bg/ng/bgn wireless settings:

1. Select Configuration > Wireless > Basic > Wireless Settings.
2. Select the wireless mode in the 2.4 GHz band:
• bg. 802.11b-compliant devices and 802.11g-compliant devices can connect to the
11
access point.
• 11ng. 802.11n-compliant devices and 802.11g-compliant devices can connect to the
access point
• 11bgn. This is the default setting. 802.11b-compliant devices, 802.11n-compliant
devices and 802.11g-compliant devices can connect to the access point. If you keep
the default setting, go to
When you change the wireless mode, the Turn Radio On check box is automatically
cleared, and all fields, buttons, and menus on the page are masked out.
3. Turn on the radio by selecting the Turn Radio On check box.
A pop-up window opens.
Note: Under normal conditions, you want the radio to be turned on. Turning off
the radio disables access through the wireless access point, which can be
helpful for configuration, network tuning, or troubleshooting activities.
4. Click the OK button to confirm the change of wireless mode. The change does not take
effect until you click the Apply button after you complete the wireless configuration.
Wireless Settings
Step 5.
Initial Setup
20