NETGEAR WAC720 Reference Manual page 17

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
To configure time settings:

1. Select Configuration > System > Basic > Time.
2. Configure the settings as explained in the following table:
Setting
Time Zone
Current Time
NTP Client
Use Custom NTP Server
3. Click the Apply button.
Your settings are saved.
Description
Select the time zone to match your location.
This is a nonconfigurable field that displays the current date and time.
Enable the Network Time Protocol (NTP) client to synchronize the time of the
wireless access point with an NTP server. By default the Enable radio button is
selected.
Select this check box if you want to use a custom NTP server.
Note: You need an Internet connection to use an NTP server that is not on
your local network.
Hostname / Enter the host name or IP address of the custom NTP server.
IP Address The default is time-b.netgear.com.
Note: If you use a host name, make sure that you configured a
DNS server.
Initial Setup
17