Change The Qos Policy For A Wireless Security Profile; Configure Legacy 802.1X; Configure Wpa With Radius And Wpa & Wpa2 With Radius - NETGEAR WAC720 Reference Manual

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
WARNING:
If you use a wireless computer to configure wireless security
settings, you are disconnected when you click the Apply button.
Reconfigure your wireless computer to match the new settings, or
access the wireless access point from a wired computer to make
further changes.

Change the QoS Policy for a Wireless Security Profile

To change the QoS policy for a wireless security profile:

1. Select Configuration > Security > Profile Settings.
The Profile Settings page displays.
2. Select the radio button the left of the wireless security profile.
3. Click the Edit button.
The Edit Security Profile page displays.
4. From the menu from which you can select another QoS policy, select None.
5. Click the Apply button.
The old policy is removed from the security profile.
6. Select the new QoS policy from the same menu.
7. Click the Apply button.
Your settings are saved.

Configure Legacy 802.1X

To use legacy 802.1X security, you must define RADIUS server settings. For information
about RADIUS servers, see
When you select Legacy 802.1X from the Network Authentication menu, the Data
Encryption menu is automatically set to None. To use legacy 802.1X security, you must
define the RADIUS servers only.
Configure WPA With RADIUS and WPA & WPA2 With RADIUS
WPA and WPA & WPA2 security require RADIUS-based 802.1x authentication, so you also
must define RADIUS server settings. For information about RADIUS servers, see
RADIUS Server Settings
The selections that are available from the Data Encryption menu depend on the type of
WPA authentication that you select from the Network Authentication menu and are shown
in the following table.
Configure RADIUS Server Settings
on page 41.
Wireless Configuration and Security
39
on page 41.
Configure