Log In To The Wireless Access Point - NETGEAR WAC720 Reference Manual

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730

Log In to the Wireless Access Point

The default IP address of your wireless access point is 192.168.0.100. By default, the DHCP
client on the wireless access point is enabled. If your network includes a DHCP server but
you want to access the access point using the default IP address, you must remove the
DHCP server from the network.
To log in to the wireless access point:

1. Open a web browser such as Microsoft Internet Explorer 11 or later.
2. Connect to the wireless access point by entering its default address of 192.168.0.100 in your
browser (use http and not https).
3. Enter the default user name of admin and the default password of password.
4. Click the Login button.
The web browser displays the basic General system settings page under the
Configuration tab of the main menu.
Web Management Interface
The navigation tabs across the top of the web management interface provide access to all
the configuration functions of the wireless access point and remain constant. The menu items
in the blue bar change according to the navigation tab that is selected.
The top right corner of all pages that allow you to make configuration changes show the
Apply and Cancel buttons, and on several pages the Edit button.
These buttons provide the following functions:
• Edit. Allows you to edit the existing configuration.
• Cancel. Cancels all configuration changes that you made on the page.
• Apply. Saves and applies all configuration changes that you made on the page.
Initial Setup
15