NETGEAR WAC720 Reference Manual page 86

ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
Setting Description
Match Frame 802.1P
Fields and Match
Classifications
(continued)
IP Protocol
Ether Type
Source MAC
Destination
MAC
From the Match Classifications menu, select the CoS priority value
against which the information in the IP header must be matched:
• Routine(0)
• Priority(1)
• Immediate(2)
• Flash(3)
• Flash Override(4)
• Critic/CCP(5)
• Inter Control(6)
• Network Control(7)
In the Match Classifications field, enter the IP protocol value against
which the information in the IP header must be matched. A list of
protocol values is available at
http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xml
In the Match Classifications field, enter the Ether type value against
which the information in the IP header must be matched. A list of Ether
type values is available at
http://standards.ieee.org/develop/regauth/ethertype/eth.txt.
In the Match Classifications field, select or enter the source MAC
address against which the information in the IP header must be
matched.
To select the MAC address of a wireless client that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
menu.
2. From the menu, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
menu.
2. In the field to the right of the radio button, enter a MAC address.
In the Match Classifications field, select or enter the destination MAC
address against which the information in the IP header must be
matched.
To select the MAC address of a wireless client that is connected to the
wireless access point:
1. Select the radio button to the left of the Match Classifications
menu.
2. From the menu, select a MAC address.
To enter a MAC address:
1. Select the radio button to the right of the Match Classifications
menu.
2. In the field to the right of the radio button, enter a MAC address.
Advanced Configuration
86
.