ZyXEL Communications USG40 User Manual page 542

32.3.2.3.1 Add/Edit Security Profile
This screen allows you to create a new security profile or edit an existing one. To access this screen,
click the Add button or select a security profile from the list and click the Edit button.
Note: This screen's options change based on the Security Mode selected. Only the
default screen is displayed here.
Figure 356 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
The following table describes the labels in this screen.
Table 220 Configuration > Object > AP Profile > SSID > Security Profile > Add/Edit Security Profile
LABEL
Profile Name
Security Mode
Radius Server Type
Primary /
Secondary Radius
Server Activate
Chapter 32 Object
DESCRIPTION
Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores
are allowed.
Select a security mode from the list: wep, wpa, wpa2, or wpa2-mix.
Select Internal to use the ZyWALL/USG's internal authentication database, or External
to use an external RADIUS server for authentication.
Select this to have the ZyWALL/USG use the specified RADIUS server.
ZyWALL/USG Series User's Guide
542