14.4.2 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the ZyWALL/USG.
Make sure the computer is connected to a LAN port of the ZyWALL/USG. Turn on your computer
and the ZyWALL/USG.
14.4.2.1 Auto-discover Your UPnP-enabled Network Device
Click start and Control Panel. Double-click Network Connections. An icon displays under
1
Internet Gateway.
Right-click the icon and select Properties.
2
Figure 190 Network Connections
In the Internet Connection Properties window, click Settings to see the port mappings there
3
were automatically created.
Figure 191 Internet Connection Properties
You may edit or delete the port mappings or click Add to manually add port mappings.
4
Chapter 14 UPnP
ZyWALL/USG Series User's Guide
286