ZyXEL Communications USG40 User Manual page 668

Table 290 Configuration > Log & Report > Log Setting > Log Category Settings (continued)
LABEL DESCRIPTION
System Log Select which events you want to log by Log Category. There are three choices:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - create log messages and alerts from this
category
enable normal logs and debug logs (yellow check mark) - create log messages, alerts,
and debugging information from this category; the ZyWALL/USG does not e-mail debugging
information, however, even if this setting is selected.
USB Storage Select which event log categories to save to a connected USB storage device. There are
three choices:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - save log messages and alerts from this category
enable normal logs and debug logs (yellow check mark) - save log messages, alerts,
and debugging information from this category.
E-mail Server 1 Select whether each category of events should be included in the log messages when it is e-
E-mail mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings
specified in E-Mail Server 1. The ZyWALL/USG does not e-mail debugging information,
even if it is recorded in the System log.
E-mail Server 2 Select whether each category of events should be included in log messages when it is e-
E-mail mailed (green check mark) and/or in alerts (red exclamation point) for the e-mail settings
specified in E-Mail Server 2. The ZyWALL/USG does not e-mail debugging information,
even if it is recorded in the System log.
Remote Server For each remote server, select what information you want to log from each Log Category
1~4 (except All Logs; see below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this
category
enable normal logs and debug logs (yellow check mark) - log regular information,
alerts, and debugging information from this category
OK Click this to save your changes and return to the previous screen.
Cancel Click this to return to the previous screen without saving your changes.
Chapter 34 Log and Report
ZyWALL/USG Series User's Guide
668