The Vpn Gateway Screen - ZyXEL Communications USG40 User Manual

19.3 The VPN Gateway Screen

The VPN Gateway summary screen displays the IPSec VPN gateway policies in the ZyWALL/USG,
as well as the ZyWALL/USG's address, remote IPSec router's address, and associated VPN
connections for each one. In addition, it also lets you activate and deactivate each VPN gateway. To
access this screen, click Configuration > VPN > Network > IPSec VPN > VPN Gateway. The
following screen appears.
Figure 232 Configuration > VPN > IPSec VPN > VPN Gateway
Each field is discussed in the following table. See
Table 145 Configuration > VPN > IPSec VPN > VPN Gateway
LABEL
Add
Edit
Remove
Activate
Inactivate
Object References
#
Status
Name
My address
Secure Gateway
VPN Connection
Chapter 19 IPSec VPN
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
Select an entry and click Object References to open a screen that shows which settings
use the entry. See Section 8.3.2 on page 173
This field is a sequential value, and it is not associated with a specific VPN gateway.
The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
This field displays the name of the VPN gateway
This field displays the interface or a domain name the ZyWALL/USG uses for the VPN
gateway.
This field displays the IP address(es) of the remote IPSec routers.
This field displays VPN connections that use this VPN gateway.
ZyWALL/USG Series User's Guide
353
Section 19.3.1 on page 354
for an example.
for more information.