ZyXEL Communications USG40 User Manual page 523

The following table describes the labels in this screen.
Table 208 Configuration > User/Group > User > Add
LABEL DESCRIPTION
User Name Type the user name for this user account. You may use 1-31 alphanumeric characters,
underscores(
case-sensitive. User names have to be different than user group names, and some
words are reserved. See
User Type This field displays the types of user accounts the ZyWALL/USG uses:
• admin - this user can look at and change the configuration of the ZyWALL/USG
• limited-admin - this user can look at the configuration of the ZyWALL/USG but not
to change it
• user - this user has access to the ZyWALL/USG's services and can also browse user-
mode commands (CLI).
• guest - this user has access to the
configuration.
• ext-user - this user account is maintained in a remote server, such as RADIUS or
LDAP. See
• ext-group-user - this user account is maintained in a remote server, such as
RADIUS or LDAP. See
about this type.
Password This field is not available if you select the ext-user or ext-group-user type.
Enter the password of this user account. It can consist of 4 - 31 alphanumeric
characters.
Retype This field is not available if you select the ext-user or ext-group-user type.
Group Identifier This field is available for a ext-group-user type user account.
Specify the value of the AD or LDAP server's Group Membership Attribute that
identifies the group to which this user belongs.
Associated AAA This field is available for a ext-group-user type user account. Select the AAA server to
Server Object use to authenticate this account's users.
Description Enter the description of each user, if any. You can use up to 60 printable ASCII
characters. Default descriptions are provided.
Authentication If you want the system to use default settings, select Use Default Settings. If you
Timeout Settings want to set authentication timeout to a value other than the default settings, select Use
Manual Settings then fill your preferred values in the fields that follow.
Lease Time If you select Use Default Settings in the Authentication Timeout Settings field, the
default lease time is shown.
If you select Use Manual Settings, you need to enter the number of minutes this user
has to renew the current session before the user is logged out. You can specify 1 to
1440 minutes. You can enter 0 to make the number of minutes unlimited. Admin users
renew the session every time the main screen refreshes in the Web Configurator. Access
users can renew the session by clicking the Renew button on their screen. If you allow
access users to renew time automatically (see
can select this check box on their screen as well. In this case, the session is
automatically renewed before the lease time expires.
Reauthentication If you select Use Default Settings in the Authentication Timeout Settings field, the
Time default lease time is shown.
If you select Use Manual Settings, you need to type the number of minutes this user
can be logged into the ZyWALL/USG in one session before the user has to log in again.
You can specify 1 to 1440 minutes. You can enter 0 to make the number of minutes
unlimited. Unlike Lease Time, the user has no opportunity to renew the session
without logging out.
Configuration Use a user account from the group specified above to test if the configuration is correct.
Validation Enter the account's user name in the User Name field and click Test.
Chapter 32 Object
), or dashes (-), but the first character cannot be a number. This value is
_
Section 32.2.2.2 on page
Ext-User Accounts on page 519
Ext-Group-User Accounts on page 520
ZyWALL/USG Series User's Guide
523
522.
ZyWALL/USG
's services but cannot look at the
for more information about this type.
for more information
Section 32.2.4 on page 525), the users