ZyXEL Communications USG40 User Manual page 565

Table 239 Configuration > Object > Schedule > Edit (One Time) (continued)
LABEL
OK
Cancel
32.7.2.2 The Recurring Schedule Add/Edit Screen
The Recurring Schedule Add/Edit screen allows you to define a recurring schedule or edit an
existing one. To access this screen, go to the Schedule screen (see
and click either the Add icon or an Edit icon in the Recurring section.
Figure 377 Configuration > Object > Schedule > Edit (Recurring)
The Year, Month, and Day columns are not used in recurring schedules and are disabled in this
screen. The following table describes the remaining labels in this screen.
Table 240 Configuration > Object > Schedule > Edit (Recurring)
LABEL
Configuration
Name
Date Time
StartTime
StopTime
Weekly
Week Days
OK
Cancel
Chapter 32 Object
DESCRIPTION
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Type the name used to refer to the recurring schedule. You may use 1-31 alphanumeric
characters, underscores( ), or dashes (-), but the first character cannot be a number.
_
This value is case-sensitive.
Specify the hour and minute when the schedule begins each day.
• Hour - 0 - 23
• Minute - 0 - 59
Specify the hour and minute when the schedule ends each day.
• Hour - 0 - 23
• Minute - 0 - 59
Select each day of the week the recurring schedule is effective.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
ZyWALL/USG Series User's Guide
565
Section 32.7.2 on page 563),