The Security Policy Control Add/Edit Screen - ZyXEL Communications USG40 User Manual

Table 131 Configuration > Security Policy > Policy Control (continued)
LABEL
Action
Profile
Apply
Reset

18.2.2 The Security Policy Control Add/Edit Screen

In the Security Policy Control screen, click the Edit or Add icon to display the Security Policy
Edit or Add screen.
Figure 217 Configuration > Security Policy > Policy Control > Add
The following table describes the labels in this screen.
Table 132 Configuration > Security Policy > Policy Control > Add
LABEL
Create new
Object
Enable
Name
Chapter 18 Security Policy
DESCRIPTION
This field displays whether the Security Policy silently discards packets (deny), or permits
the passage of packets (allow).
This field shows you which UTM profiles (application patrol, content filter, IDP, anti-virus,
anti-spam) apply to this Security policy.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Use to configure any new settings objects that you need to use in this screen.
Select this check box to activate the Security policy.
Type a name to identify the policy
ZyWALL/USG Series User's Guide
325