ZyXEL Communications USG40 User Manual page 559

To access this screen, log in to the Web Configurator, and click Configuration > Object > Service
> Service. Click a column's heading cell to sort the table entries by that column's criteria. Click the
heading cell again to reverse the sort order.
Figure 371 Configuration > Object > Service > Service
The following table describes the labels in this screen.
Table 234 Configuration > Object > Service > Service
LABEL
Add
Edit
Remove
Object
References
#
Name
Content
Reference
32.6.2.1 The Service Add/Edit Screen
The Service Add/Edit screen allows you to create a new service or edit an existing one. To access
this screen, go to the Service screen (see
icon or an Edit icon.
Figure 372 Configuration > Object > Service > Service > Edit
Chapter 32 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific service.
This field displays the name of each service.
This field displays a description of each service.
This displays the number of times an object reference is used in a profile.
ZyWALL/USG Series User's Guide
559
Section 32.6.2 on page 558), and click either the Add