ZyXEL Communications USG40 User Manual page 683

Figure 477 Maintenance > Diagnostics > Packet Capture
The following table describes the labels in this screen.
Table 297 Maintenance > Diagnostics > Packet Capture
LABEL
Interfaces
IP Version
Protocol Type
Host IP
Chapter 36 Diagnostics
DESCRIPTION
Enabled interfaces (except for virtual interfaces) appear under Available
Interfaces. Select interfaces for which to capture packets and click the right arrow
button to move them to the Capture Interfaces list. Use the [Shift] and/or [Ctrl]
key to select multiple objects.
Select the version of IP for which to capture packets. Select any to capture packets
for all IP versions.
Select the protocol of traffic for which to capture packets. Select any to capture
packets for all types of traffic.
Select a host IP address object for which to capture packets. Select any to capture
packets for all hosts. Select User Defined to be able to enter an IP address.
ZyWALL/USG Series User's Guide
683