ZyXEL Communications USG40 User Manual page 676

the Destroy compressed files that could not be decompressed option while you download the
firmware package. See
compressed files that could not be decompressed option.
The firmware update can take up to five minutes. Do not turn off or reset
the ZyWALL/USG while the firmware update is in progress!
Figure 468 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
Table 293 Maintenance > File Manager > Firmware Package
LABEL DESCRIPTION
Firmware Status
Reboot Now Click the Reboot Now button to restart the ZyWALL/USG. If you applied changes in the
Web configurator, these were saved automatically and do not change when you reboot. If
you made changes in the CLI, however, you have to use the write command to save the
configuration before you reboot. Otherwise, the changes are lost when you reboot.
If you want the Standby firmware to be the Running firmware, then select the Standby
firmware row and click Reboot Now. Wait a few minutes until the login screen appears.
If the login screen does not appear, type the IP address of the device in your Web
browser.
You can also use the CLI command reboot to restart the ZyWALL/USG.
# This displays the system space (partition) index number where the firmwarm is located.
The firmware can be either Standby or Running; only one firmware can be running at
any one time.
Status This indicates whether the firmware is Running, or not running but already uploaded to
the ZyWALL/USG and is on Standby. It displays N/A if there is no firmware uploaded to
that system space.
Model This is the model name of the device which the firmware is running on.
Version This is the firmware version and the date created.
Released Date This is the date that the version of the firmware was created.
Upload File Click the To upload image file in system space pull-down menu and select 1 or 2. The
default is the Standby system space, so if you want to upload new firmware to be the
Running firmware, then select the correct system space.
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Chapter 35 File Manager
Section 28.2.1 on page 472
ZyWALL/USG Series User's Guide
676
for more on the anti-virus Destroy