Dhcp Table Screen - ZyXEL Communications USG40 User Manual

This table describes the fields in the above screen.
Table 21 Dashboard > System Status > VPN Status
LABLE
#
Name
Encapsulation
Algorithm
Refresh Interval
Refresh

5.2.4 DHCP Table Screen

Click on the DHCP Table link to look at the IP addresses currently assigned to DHCP clients and the
IP addresses reserved for specific MAC addresses. The following screen will show.
Figure 75 Dashboard > System Status > DHCP Table
This table describes the fields in the above screen.
Table 22 Dashboard > System Status > DHCP Table
LABEL
#
Interface
IP Address
Host Name
Chapter 5 Dashboard
DESCRIPTION
This field is a sequential value, and it is not associated with a specific SA.
This field displays the name of the IPSec SA.
This field displays how the IPSec SA is encapsulated.
This field displays the encryption and authentication algorithms used in the SA.
Select how often you want this window to be updated automatically.
Click this to update the information in the window right away.
DESCRIPTION
This field is a sequential value, and it is not associated with a specific entry.
This field identifies the interface that assigned an IP address to a DHCP client.
This field displays the IP address currently assigned to a DHCP client or reserved
for a specific MAC address. Click the column's heading cell to sort the table
entries by IP address. Click the heading cell again to reverse the sort order.
This field displays the name used to identify this device on the network (the
computer name). The ZyWALL/USG learns these from the DHCP client requests.
"None" shows here for a static DHCP entry.
ZyWALL/USG Series User's Guide
88