ZyXEL Communications USG40 User Manual page 649

Figure 453 Configuration > System > IPv6
The following table describes the labels in this screen.
Table 284 Configuration > System > IPv6
LABEL DESCRIPTION
Enable IPv6 Select this to have the ZyWALL/USG support IPv6 and make IPv6 settings be
available on the screens that the functions support, such as the Configuration >
Network > Interface > Ethernet, VLAN, and Bridge screens. The ZyWALL/USG
discards all IPv6 packets if you clear this check box.
Apply Click Apply to save your changes back to the ZyWALL/USG.
Reset Click Reset to return the screen to its last-saved settings.
Chapter 33 System
ZyWALL/USG Series User's Guide
649