The Session Control Add/Edit Screen - ZyXEL Communications USG40 User Manual

Table 137 Configuration > Security Policy > Session Control (continued)
LABEL
Edit
Remove
Activate
Inactivate
Move
Status
#
User
IPv4 / IPv6
Address
Description
Limit
Apply
Reset

18.4.1 The Session Control Add/Edit Screen

Click Configuration > Security Policy > Session Control and the Add or Edit icon to display
the Add or Edit screen. Use this screen to configure rules that define a session limit for specific
users or addresses.
Figure 223 Configuration > Security Policy > Session Control > Edit
The following table describes the labels in this screen.
Table 138 Configuration > Security Policy > Session Control > Add / Edit
LABEL
Create new
Object
Enable Rule
Chapter 18 Security Policy
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To change a rule's position in the numbered list, select the rule and click Move to display a
field to type a number for where you want to put that rule and press [ENTER] to move the
rule to the number that you typed.
The ordering of your rules is important as they are applied in order of their numbering.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This is the index number of a session limit rule. It is not associated with a specific rule.
This is the user name or user group name to which this session limit rule applies.
This is the IPv4 / IPv6 address object to which this session limit rule applies.
This is the information configured to help you identify the rule.
This is how many concurrent sessions this user or address is allowed to have.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Use to configure new settings for User or Address objects that you need to use in this
screen.Click on the down arrow to see the menu.
Select this check box to turn on this session limit rule.
ZyWALL/USG Series User's Guide
336