Exclude List Screen - ZyXEL Communications USG40 User Manual

30.3 Exclude List Screen

There may be privacy and legality issues regarding inspecting a user's encrypted session. The legal
issues may vary by locale, so it's important to check with your legal department to make sure that
it's OK to intercept SSL traffic from your ZyWALL/USG users.
To ensure individual privacy and meet legal requirements, you can configure an exclusion list to
exclude matching sessions to destination servers. This traffic is not intercepted and is passed
through uninspected.
Click Configuration > UTM Profile > SSL Inspection > Exclude List to display the following
screen. Use Add to out a new item in the list or Edit to change an existing one or Remove to
delete an existing entry.
Figure 330 Configuration > UTM Profile > SSL Inspection > Exclude List (> Add/Edit)
The following table describes the fields in this screen.
Table 200 Configuration > UTM Profile > SSL Inspection > Exclude List
LABEL
General Settings
Enable Logs
for Exclude
List
Exclude List
Settings
Add
Edit
Remove
#
Chapter 30 SSL Inspection
DESCRIPTION
Click this to create a log for traffic that bypasses SSL Inspection.
Use this part of the screen to create, edit, or delete items in the SSL Inspection exclusion
list.
Click this to create a new entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
This is the entry's index number in the list.
ZyWALL/USG Series User's Guide
499