The Dhcpv6 Request Screen - ZyXEL Communications USG40 User Manual

32.13.1 The DHCPv6 Request Screen

The Request screen allows you to add, edit, and remove DHCPv6 request type objects. To access
this screen, login to the Web Configurator, and click Configuration > Object > DHCPv6 >
Request.
Figure 406 Configuration > Object > DHCPv6 > Request
The following table describes the labels in this screen.
Table 260 Configuration > Object > DHCPv6 > Request
LABEL
Configuration
Add
Edit
Remove
Object
References
#
Name
Type
Interface
Value
32.13.1.1 DHCPv6 Request Add/Edit Screen
The Request Add/Edit screen allows you to create a new request object or edit an existing one.
To access this screen, go to the Request screen (see
either the Add icon or an Edit icon.
Figure 407 Configuration > DHCPv6 > Request > Add
Chapter 32 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The ZyWALL/USG confirms you want to
remove it before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific object.
This field displays the name of each request object.
This field displays the request type of each request object.
This field displays the interface used for each request object.
This field displays the value for each request object.
ZyWALL/USG Series User's Guide
603
Section 32.13.1 on page 603), and click