Reducing/Enlarging The Length And Width (Independent X-Y%); Reducing/Enlarging The Length And Width; (Independent X-Y%) - Xerox Document Centre 706 Series User Manual

G If you have also selected Auto
Centre for Image Shift, then the
image will be copied onto the centre
of the paper as shown in the
diagram on the right.
G You can select a ratio between 25-
400% in 1% increments.
G You can enter a length (Y) between
1-999 mm in 1 mm increment.
G The machine will automatically
adjust the ratio to 25% if the
calculated ratio is below 25%, and
400% if the calculated ratio is above
400%.
G When this is selected with Image
Rotation off, the resulting output will
be as illustrated on the right.
Reducing/Enlarging the
Length and Width
The Independent X-Y% feature allows you to make copies with independent
length or width of the original. There are three methods available.
G Specifying X/Y percentage change (Variable X-Y%)
Y
X
G Specifying original/copy size (Calculator %)
G Automatic X/Y percentage change (Auto-Fit)

(Independent X-Y%)

4-4 Reducing/Enlarging the Length and Width (Independent X-Y%)

G G
Basic Features
You can make copies of
the originals by
selecting different ratios
for X and Y. The image
will be copied according
to your selected values.
Copies will be made
based on the ratios
calculated by the
machine from the input
measurements of the
document and the
desired copy.
The machine will make
copies of the originals
by calculating the X and
Y ratios so that the
image can fit onto the
selected paper size.
4
55