Loading Documents; Loading Documents In The Dadf - Xerox Document Centre 706 Series User Manual

G

Loading Documents

Loading documents in the DADF

G The DADF cannot be used for some
3
types of documents. See Loading
documents in the DADF in 3-1
Documents for the details.
G For originals of mixed sizes, see 5-5
Loading MIxed Size Originals (Mixed
Size Originals).
G Align the lead edges of your
documents.
G Document feeder jams may occur if
the guide is not positioned correctly.
42 3-2 Loading Documents
G
Loading Documents
Load the documents in the DADF or place it on the document glass.
The DADF lets you load a stack of documents for feeding to the scanner
one sheet at a time, and output them after scanning. 50 sheets can be
loaded each time, thus saving time of loading documents manually.
G Procedure
Align the lead edges of your documents.
Remove any staple or clip on the document.
Load documents face up
(side one should face up in
the case of two sided
copying) against the guide
at the rear.
The confirmation light becomes lit.
Move the document guide
to gently touch the
document.
G Note when copying 51 sheets of documents or more
50 documents can be loaded each time, but documents can be added
for continuous scanning up to a total of 700 sheets (350 sheets for
two-sided copying). During the scanning of the first document loaded,
select Next Document on the screen. After scanning has ended, add
documents and press Start to continue scanning other documents.
Select End Job if there are no further documents for scanning.
However, when Stapling, 1 -> 2 Sided, or Multi-Up (N Up) is selected, no
documents can be added for scanning.