Xerox Document Centre 706 Series User Manual page 125

G Select Cancel to cancel the settings.
G The factory default is Mirror Shift.
G Normally, you should select Mirror
Shift when inserting the binding shift
on a two-sided copy.
G When paper is the same size as the
document, and Reduce/Enlarge is
at 100% (factory default), copy
position will not be shifted.
G Some features cannot be selected
together with this feature. See
Appendix B Possible Combinations
of Features for details.
Select Side 2 when making two-sided copies, and define the
image and binding shifts. Select Mirror Shift if you want side
two of the document to be a mirror image of side one.
Confirm the settings, and select Save twice.
Select the paper size from Paper Supply and % from Reduce/
Enlarge.
When Image Shift, or Auto Centre is selected, select a paper size larger than
the document, or adjust Reduce/Enlarge.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies are made according to the image shift settings made.
G
Added Features
5-7 Setting the Margins (Image Shift)
G
5
101