Xerox Document Centre 706 Series User Manual page 196

G G
Troubleshooting
Symptom
Part of the image is missing on
the copy.
Document is not fed.
Document is often jammed.
7
A corner of the document is
folded.
The scanning of the document
was stopped halfway.
7-1 Troubleshooting
172
Check
Is the paper damp?
Is the paper folded or wrinkled?
Is the DADF open?
Is the document too small?
Is the right type of document used?
Is the document non standard, or are
documents such as name cards,
transparencies and thin paper used?
Are stickers, clips and cellophane tapes
attached to the document?
Is the document guide on the DADF in the
right position?
Is part of the document torn and the
pieces of paper still remaining in the
DADF?
Is the document curled?
Did you load 51 sheets of documents or
more on the DADF?
Measure
If the paper is damp, either some parts of
the copy are not shown or the copy is
smudged and unclear. Replace it with a
newly opened ream of paper.
2-3 Loading Paper
G
Replace the undesirable paper with paper
from a newly opened ream.
2-3 Loading Paper
G
Close the DADF.
The minimum size of document that can be
used on the DADF is A5 or 5.5 x 8.5".
3-1 Documents
G
Load documents that can be handled by
the DADF.
3-1 Documents
G
3-2 Loading Documents
G
Remove the stickers, clips and cellophane
tapes and copy again.
Ensure that the document guide on the
DADF touches the edge of the document.
Loading documents in the DADF in
G
3-2 Loading Documents
Open the cover of the DADF to check that
there are no torn paper.
7-3 Document Jams
G
Load the document again after you have
uncurled the document.
The maximum number of sheets that can
be loaded on the DADF is 50. When 51
sheets or more have to be loaded, divide
them into multiple jobs.
Loading documents in the DADF in
G
3-2 Loading Documents