Xerox Document Centre 706 Series User Manual page 123

G The screen on the right has the
finisher installed.
G The factory default is No Shift.
G Select Cancel to cancel the settings.
Procedure
Select Features Menu. Then select Image Shift.
Select Side 1.
Select the position to shift the document to.
For example, set a left margin of 10 mm ➔ Set
• Corner Shift: Select
• Auto Centre: Select Auto Centre.
• Margin: Use
between 0 - 432 mm.
G
Added Features
(Right) at 10 mm.
.
to set up, down, left, or right margin
5-7 Setting the Margins (Image Shift)
G
5
99