Scan Width - Xerox 6204 Copy/Scan Operation Manual

Scan Width

Procedure
The 6204 Wide Format Solution is set up by default to scan standard size originals. If
you wish to copy a non-standard width original, define the width using the [Scan Width]
selection. This feature allows you to define a variable scan width of from 8.2 to 36
inches, in increments of 0.1 inch. The factory default setting is [Standard Width].
1
Select [Scan Width] on the top [1] [More
Features] tab.
The [Scan Width] screen will display.
2
Select [Variable Width] when scanning a non-
standard width original.
The [Scan Width] selection screen will display.
3
Using either the numeric keypad or the scroll
buttons, enter the desired scan width, and then
select [Save].
Xerox 6204 Wide Format Solution
Setting up the [More Features] selections
3
71